As the Manufacturing and installation company of kitchen canopies, ventilation and swimming pool dehumidifiers, we provide design and installation of air conditioning and comfort cooling systems. Specialist ventilation and air conditioning with stamina active solutions for your environment, Company Overview, Design and build mechanical services for all kinds of buildings, throughout the UK,Members of the B&ES (HVCA), Construction line, Refcom. CHAS Accredited, Mitsubishi Electric Approved Installer, Daikin D1 Dealer, Toshiba Approved Installer, Kensa Heat Pump Approved Installer, Ecodan Approved Installer, Altherma Approved Installer.
Our Design and installation team provides mechanical services for commercial premises. Consultancy services are accessible for challenging kitchen ventilation systems and swimming pool dehumidification. Insulation has a direct impact found on the worth of any heating program but mostly with under floor heating systems due to the low flow of temperatures and place of the heating pipes in the floor. The heat within the heating program should pass into the space within the floor, and so the insulation below the under floor heating should avoid the heat reduction downwards. The accurate width of insulation need to be installed for the system to function properly. There would be less compliance with Part L of the Building Regulations, but ideally this ought to be surpassed. This really is a one-off expense for an everlasting gain.
Exceeding Part L with more insulation in a modern building ought to be simple although in retrofitting to existing buildings this really is not constantly possible, so caution ought to be used in selecting the best program which will suit the application including the under floor heating. Air source heat pumps supply a renewable and sustainable power development for building area heating.
Air source heat pumps take heat within the air utilizing a condenser (the same as an air conditioning condenser). The extracted heat is usually chosen for room heating. It can equally be chosen to heat hot water. All heat which gets pumped are right suited to effectively insulated (perfectly insulated signifies in excess of present UK regulations) hot buildings. Air source heat pumps are easy to install than ground source heat pumps to retro-fit to existing buildings.
Andrew Engineering can shape individuals answer to satisfy the needs and offer vitality effective solutions for your location.
Andrew Engineering will figure and build systems utilizing equipment from a range of main producers, yet stay completely independent. Choice of equipment is based upon consideration of all of the factors concerned to achieve the greatest answer for the customer.
The program we suggest utilizes vacuum tubes as they have excellent efficiency all year round.
Ground source heat pumps take heat from under the ground utilizing a liquid flowing in a buried pipe. The heat removed is usually selected to warm water for room heating.
Ground source heat pumps (GSHP) are ideal suited to perfectly insulated (effectively insulated signifies in excess of present UK laws.) new buildings, but may furthermore be retro-fitted to existing buildings
|Business Operation Hours|
8:00 AM to 5:00 PM
8:00 AM to
8:00 AM to 5:00 PM
8:00 AM to 5:00 PM
8:00 AM to 5:00 PM
|Brands||Mitsubishi Electric, Daikin & More|
Air Conditioning Installation in Chesterfield, Uk
Whatever your air conditioning needs, if you need cooling or heating, Andrew Engineering can turn your requirement into reality.
Kitchen Ventilation in Chesterfield
Make your kitchen a refreshing and hygienic place to work. “With an Andrew Engineering kitchen canopy ventilation system, you not only enjoy an effective system that saves you energy, but it’s good looking too!”
Ventilation in Chesterfield
Ventilation is an essential part of creating a pleasant and comfortable environment for occupied spaces.
Design and Build
We specialise in the design, build & installation of individual Mechanical Services solutions to meet individual client requirements.
“With a reputation for energy efficient solutions, Andrew Engineering will be able to turn your requirement into reality.”
From initial client brief and systems design to hand over, the whole process will be professionally managed. Either working from a fully specified client requirement or an open statement of requirement, Andrew Engineering will bring the experience necessary to ensure the optimum systems selection and successful project management. Specialist knowledge and experience enables upgrading of existing facilities or a cost effective new solution.
Andrew Engineering have the in-house capability to carry out:
Site Visit – Free site investigation to determine optimum solutions
Proposal – Clear statement of design brief and assumptions used. Detailed, costed proposals. Client designs and specifications fully costed
Design – CAD facility using AUTOCAD, full colour drawing reproduction, E-mail for rapid transfer of drawings. Innovations in shape and colour to suit interior designs. All designs are to industry standards, building regulations and appropriate guidelines
Manufacture – workshop for in house manufacture such as:
Kitchen canopies / Extractor hoods
Air handling units
Swimming pool dehumidifiers
Tailoring of proprietary units
Painting and specialist finishes
Installation – Our own technicians carry out site installations. Minimisation of customer disruption and downtime. Close co-ordination with other contractors on site. All work in accordance with Health & Safety legislation
Commissioning – All systems are fully tested
Hand Over – On site client training and O & M manuals
Aftercare – 12 months warranty, unlimited telephone support and planned maintenance options available
From receipt of the customer order, a Project Manager is allocated to each project to provide a single point of contact and to ensure the client requirements are achieved.